Find Electric Hoist, Overhead Crane, Gantry Crane on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
2021-05-09
| Item | stainless steel bar,stainless steel rod ,stainless steel shaft |
| Standard | ASTMA276,A479,A582,GB4226-84,GB/T1220-2007,JISG4311-91,JISG4318-98, EN 10095-99,GB4226-84,EN10088-3-2005,JISG4303-2005,etc |
| Material | 310S,309S,316,316L,316Ti,317,317L,321,321H,347,347H,304,304L,301,302,201, 202,405,409,410,420,430,S32304,S31803,S32550,S32750,S31500,S31260,SS2377 ,SS2327,SS2376,etc |
| Shape | Round,flat,angle,hexagonal,rectangular,square |
| Diameter | 3~800mm |
| Length | 5.8m,6m, 11.8m,12m, or as required . |
| Surface | Black,peeled,polishing,bright,sand blast,hair line,brush,stain,etc |
| Export to | Singapore,Canada,Indonesia,Korea,USA,UK,Thailand,Peru,Saudi Arabia,Viet Nam,Russia, Iran,India,Ukraine,Brazil,South Africa,Kuwait,Oman,Mexico,Peru,etc |
| Application | Stainless steel bar applies to petroleum, chemical industry, electric power, boiler, high temperature resistant, low temperature resistant, corrosion resistant Stainless steel bar can be made according to the customers requirements. |
| Contact | If you have any question,please feel free to contact me . we are sure your inquiry or requirements will get prompt attention. |
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | / |
| 201 | ≤ 0.15 | ≤ 1.0 | 5.5-7.5 | ≤ 0.06 | ≤ 0.03 | 16.0-18.0 | 3.5-5.5 | / | ≤ 0.25 | |
| 202 | ≤ 0.15 | ≤ 1.0 | 7.5-10 | ≤ 0.06 | ≤ 0.03 | 17.0-19.0 | 4.0-6.0 | / | ≤ 0.25 | |
| 301 | ≤ 0.15 | ≤ 1.0 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 16.0-18.0 | 7.0-9.0 | / | / | |
| 304 | ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 18.0-20.0 | 8.0-10.5 | / | ≤ 0.10 | |
| 304L | ≤ 0.03 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 18.0-20.0 | 8.0-12.0 | / | ≤ 0.10 | |
| 309S | ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 22.0-24.0 | 12.0-15.0 | / | / | |
| 310S | ≤ 0.08 | ≤ 1.50 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 24.0-26.0 | 19.0-22.0 | / | / | |
| 316 | ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | ≤ 0.10 | |
| 316L | ≤ 0.03 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | ≤ 0.10 | |
| 316Ti | ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | ≤ 0.10 | Ti ≤ 0.70 |
| 317 | ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | ≤ 0.10 | / |
| 317L | ≤ 0.03 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | ≤ 0.10 | |
| 321 | ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 17.0-19.0 | 9.0-12.0 | / | ≤ 0.10 | Ti ≤ 0.70 |
| 347 | ≤ 0.08 | ≤ 0.75 | ≤ 2.0 | ≤ 0.045 | ≤ 0.03 | 17.0-19.0 | 9.0-13.0 | Nb ≤ 1.00 | ||
| 405 | ≤ 0.08 | ≤ 1.00 | ≤ 1.0 | ≤ 0.040 | ≤ 0.030 | 11.5-14.5 | ≤ 0.60 | Al:0.10-0.30 | ||
| 410 | 0.08-0.15 | ≤ 1.00 | ≤ 1.0 | ≤ 0.04 | ≤ 0.03 | 11.5-13.5 | ≤ 0.75 | / | ||
| 410S | ≤ 0.08 | ≤ 1.00 | ≤ 1.0 | ≤ 0.04 | ≤ 0.03 | 11.5-13.5 | ≤ 0.60 | / | ||
| 420 | ≥ 0.15 | ≤ 1.00 | ≤ 1.0 | ≤ 0.04 | ≤ 0.03 | 12.0-14.0 | ≤ 0.75 | ≤ 0.50 | / | |
| 430 | ≤ 0.12 | ≤ 1.00 | ≤ 1.00 | ≤ 0.04 | ≤ 0.03 | 16.0-18.0 | ≤ 0.75 | / | ||
Peeled or turned steel bar is produced by peeling or turning from hot rolled steel bar. Our advantages and more services of cold drawn steel round bar includes:
1) Wide range of diameters from 20mm to 150mm
2) Customized Length from 100mm to 12000mm
3) Good surface roughness: 0.4um to 1.6um
4) Good straightness: 0.5mm/m to 2mm/m
5) Good roundness: 80% of diameter tolerance
6) Diameter tolerance: -0.02mm to -0.1mm / h9, h10, h11
7) Matched further processing: Grinding, polishing, straightening
8) Anti-rusty package
9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing
10) Fast delivery time
